7 1/2 & 15 Horse Power Units
|
15 HP stationary unit. |
| 15 HP stationary unit. Vacuum in the P.B. series is created by a 6-stage centrifugal exhauster. This unit produces 480 CFM @ 7.5" of HG (102" H2O). This particular unit is hooked up to (1) hand router, (1-2) orbital sanders and (1) 25' hose for clean-up. This unit is in operation at Bristol, A Magellan Aerospace Company. |
| 7 1/2 HP stationary unit. Vacuum in the12-S series uses dual impellers to create the vacuum through positive displacement of air in the pump. This unit produces 145 CFM @ 10.5" HG (143" H2O) This particular unit is hooked up to (2) hand routers, and at the end of the shift is used for clean-up. This unit is in operation at Bristol, A Magellan Aerospace Company. |
30 Horse Power Units
| 30 HP 4-stage centrifugal exhauster produces up to 1,800 CFM @ 5" HG (70" H2O). This particular unit has (1) 2.5" opening, (2) 15' hoses & (2) 8" graduating down to 3" opening that are controlled by slide gates. This unit is in operation at Boeing Canada Technologies. The following thumb nails will show this unit's operation. |
| Heavy gauge 24" x 72" primary separator uses centrifugal force imparted to the particles throws them against the inside surface of the separator which, along with the drastic drop in conveying velocity, traps about 90% of the conveyed material. |
| Heavy gauge 30" x 72" secondary separator is used to properly separate the remaining 10% of conveyed material. This separator uses inverted filter sleeves with a filter media of approx. 128 sq. ft. This separator is hooked up to a reverse air bag cleaner, set to clean the filter bags several times per hour. |
| (1) 2.5" opening captures waste material at the source. |
| This costume designed inlet is fabricated to follow every move of the router. |
| (2) 8" graduating down to 3" inlets are used to pick up larger waste material. |
