30 Horse Power Units

40 HP direct drive centrifugal 5-stage exhauster produces approx. 2,500 CFM @ 7.2" of HG. This system is hooked up to (25) work benches and (1) band saw and (1) cut off saw. Because of the abrasive nature of material picked up the separator is equipped with wear plates and all piping and fittings are schedule 40 cast iron. Separator is a 48" x 96" with a filter area of approx. 254 sq. ft.& 14.5 cubic ft. dust storage. Filter bags are glazed polypropylene with ground wires. System is completed with solenoid & diaphragm valves with timer control, air pressure gauge & magnehelic differential pressure gauge. System is in operation at Bristol Aerospace.

30 HP direct drive centrifugal 8-stage exhauster produces approx. 800 CFM @ 13" of HG. System is used to reclaim valuable resin with 2 50' x 1 1/2" hoses. System is in operation at American Biaxis.

Heavy gauge 32" x 72" separator is used to capture all conveyed material. This separator uses centrifugal force and filter sleeves to capture the material. Separator uses an 8" dump valve and manual bag shaker. This separator is hooked up to the above 30 HP exhauster at American Biaxis.

25 HP direct drive centrifugal 5-stage exhauster produces approx. 520 CFM @ 7.0" of HG. This particular system is used to service 3 clean rooms at Bristol Aerospace. 30 x 96" separator uses forced air in the way of a pulse jet to keep filter media at 100%.